Posted on

Advantages of making a table saw crosscut sled

I just recently made a crosscut sled, and thought I’d go over some of the advantages and disadvantages of owning a crosscut sled. I can’t think of too many disadvantages, except it is another thing to store in my small shop, which doesn’t have a lot of storage space, or any space at all. Of course, that may not be a disadvantage for you! The only other thing is you can’t use the table saw blade guard, but the sled has a lot of safety advantages.

Continue reading “Advantages of making a table saw crosscut sled”

Posted on

Making a crosscut sled

I looked all around online at the different cross cut sleds that people were making. I really liked the Nick Ferry video, his sled really looked awesome, and he explained how to make it really well. I went ahead and purchased his plans as well. You can also check out his plans here: https://nickferry.com/product/table-saw-cross-cut-miter-sled/

Here’s a link to Nick’s how to make video:  https://www.youtube.com/watch?v=ZtwK9X8o1Gw

Continue reading “Making a crosscut sled”

Posted on

Roller Stands for Table Saw Outfeed – Rolling Pin vs Roller Balls

I needed help supporting my maple lumber when ripping it on the table saw. These were unsurfaced 8/4 boards (2″ thick), 9 to 12″ wide, and ten or eleven feet long. To rip these by myself, I needed something like this to support the board coming into the saw, and on the outfeed side. The outfeed side in my case for a board this long actually has to go out my open shop door, and down a step, so it needs to adjust to fit the saw height when sitting down a step. I needed something that would fold up for easier storage.

Continue reading “Roller Stands for Table Saw Outfeed – Rolling Pin vs Roller Balls”