I’ll go over my drawer cabinet construction for my Roubo workbench. In my Christopher Schwarz book, he says not to clog up the underneath of your workbench with storage, as it can block methods of clamping work to the top of the bench. I decided with my small shop, if I could sneak in a couple small drawers under the workbench, it would be worth it for the storage. I tried to keep it a fairly low profile, to leave plenty of room under the workbench. When I put out a picture of my drawer cabinet, I got this reply:
I was having trouble using a hand plane to flatten my workbench top. The plane was having tear-out, and despite trying a backbevel, the blade continued to tear out. This is my first time trying a hand plane, I basically don’t know what I’m doing. I decided to try the router sled method to flatten it.
I’m ready to attach the top to the base finally of my Roubo style workbench. This is based on the one in Chris Schwarz’s book. I’m making it out of hard maple. Most of the techniques I’m using are new to me, so I’m learning a lot, and it is a lot of fun too.
I’ll be assembling the base of my new Roubo workbench. This is pretty exciting, as it’s been a long road getting this far, with a lot of new skills I needed to learn, such as planing and jointing, and my first mortise and tenon joints. It’s been a bunch of pieces that didn’t look like much, but now I’ll finally be putting it together! I’m a little nervous too, about gluing all the parts, getting them together and getting all the drawbored dowels into the tenons with plenty of glue too.
I’m finishing up the last few items before I can glue up the base, which will be exciting (and I’m a bit nervous about it too). I’ll be drilling dowel holes in the legs for the tenons, drilling three 3/4″ dog holes in the right leg, and drilling out the hole for the Benchcrafted Glide M leg vise screw in the left leg.
While I am left handed, I do some things left handed, some right, and sometimes it doesn’t matter, I can use either hand. I thought about it, and decided to go with the leg vise as standard, on the left side of the bench.
The continuing story of my Roubo Workbench, based on the book by Christopher Schwarz. In this part, I will be doing the 8 mortises for the stretchers to fit into the legs, and showing how I made the dowels out of some white oak. A lot of the YouTube videos crack me up, because the person always says they just happened to have the wood “lying around”. Sometimes what they had lying around is quite a bit of wood. An actual fact: I happened to have this white oak just lying around. I did not have all this hard maple wood just lying around though.