The Ultimate Workbench – Part 7

I’ll be assembling the base of my new Roubo workbench. This is pretty exciting, as it’s been a long road getting this far, with a lot of new skills I needed to learn, such as planing and jointing, and my first mortise and tenon joints. It’s been a bunch of pieces that didn’t look like much, but now I’ll finally be putting it together! I’m a little nervous too, about gluing all the parts, getting them together and getting all the drawbored dowels into the tenons with plenty of glue too.

Continue reading “The Ultimate Workbench – Part 7”

The Ultimate Workbench – Part 6

I’m finishing up the last few items before I can glue up the base, which will be exciting (and I’m a bit nervous about it too). I’ll be drilling dowel holes in the legs for the tenons, drilling three 3/4″ dog holes in the right leg, and drilling out the hole for the Benchcrafted Glide M leg vise screw in the left leg.

While I am left handed, I do some things left handed, some right, and sometimes it doesn’t matter, I can use either hand. I thought about it, and decided to go with the leg vise as standard, on the left side of the bench.


Continue reading “The Ultimate Workbench – Part 6”

The Ultimate Workbench – Part 5

The continuing story of my Roubo Workbench, based on the book by Christopher Schwarz. In this part, I will be doing the 8 mortises for the stretchers to fit into the legs, and showing how I made the dowels out of some white oak. A lot of the YouTube videos crack me up, because the person always says they just happened to have the wood “lying around”. Sometimes what they had lying around is quite a bit of wood. An actual fact: I happened to have this white oak just lying around. I did not have all this hard maple wood just lying around though.

Continue reading “The Ultimate Workbench – Part 5”